What are you working on?

Polyurethane waterproofing roof coating based on water-soluble, aliphatic (UV resistance) polyurethane resin, with high mechanical properties to allow strong walkability. Elongation (DIN) 300%. Less consumption (min 20%) than conventional polyurethane coatings, not effected by standing water. Applied on old or new acrylic or PU coatings, and as a UV protective coating.

12 kg

Water-based penetrating water repellent for porous cementitious surfaces, stone, walls and joints; non-film-forming with water-vapour permeability.

1 L / 20 L

Water-based treatment that intentionally enhances colour to a wet appearance on porous natural stone and cementitious surfaces; unpolished marble requires trial application.

1 L / 10 L

Water/oil/stain repellent for porous marble, granite and stone, described as invisible and non-film-forming.

1 L

Water/oil/dirt repellent for textiles, including cotton and leather, furniture coverings, carpets and curtains; this is not a concrete waterproofing product.

1 L

Water-based, non-film-forming treatment to stabilize deteriorated mineral surfaces such as plaster, render, cementitious materials, porous stone and clay tiles.

1 L

Water-based impregnation against capillary rising damp for untreated absorbent inorganic substrates such as concrete, render, plaster, brick and porous stone.

1 L

Alcohol-based water repellent for glass, including bathroom glass and glazed facades; intended to preserve transparency.

0.5 L

Transparent non-film-forming penetrating water-repellent treatment for listed tiled, masonry and concrete surfaces; it is not described as a movement-joint repair membrane.

1 L

Anti-Slip varnish listed in the catalogue. The attached PDF covers the Matte/Gloss variant; confirm the exact Anti-Slip datasheet and application system with Elmawad.

5 kg

Polyurethane foam for sealing, assembling, filling, and insulating. Used in a wide range of applications, offering excellent adhesion for all building materials. Provides good thermal and acoustic insulation with high resistance to water and aging.

500 mL

Three-component epoxy-cement waterproofing preparation for damp/wet cementitious substrates and compatible finishing systems; concrete tanks listed are for non-drinking water.

30.8 kg kit (A: 1.8 kg + B: 5 kg + C: 24 kg)

Two-component flexible cementitious sealing slurry for concrete, masonry and renders, including tanks, pools and under-tile balconies, terraces, baths and showers.

35 kg kit (25 kg + 10 kg)

Two-component fibre-reinforced cementitious waterproofing for concrete tanks and under-tile wet areas, balconies and pools; also protects concrete from ingress.

33 kg kit (25 kg + 8 kg)

Crystalline cementitious slurry for concrete under positive or negative water pressure; moisture is required for the stated crystallization reaction.

25 kg

Powder crystalline/hydrophobic admixture for watertight concrete, with dosage and mix suitability determined through trials.

17 kg